Design contains obsolete parts

STEVAL-ISB042V1: 15W Qi and 5W Airfuel receiver and Qi-based transmitter

Summary

The STEVAL-ISB042V1 is a 15-watt Qi and 5-watt Airfuel inductive (former PMA) wireless power receiver evaluation board based on the STWLC33 wireless power receiver solution for the WPC/Airfuel mobile device with dual mode coil. The board lets you evaluate the STWLC33 capabilities as a Qi/Airfuel inductive receiver as well as its ability to power another Qi receiver.

The solution is certified in accordance with the extended power profile Qi v1.2 and Airfuel SR1 standard. The STWLC33 IC is powered by a dual mode Rx coil attached to a 1.5 mm thick plastic fixture. The STWLC firmware offers users the flexibility to modify parameters and settings to ensure proper integration of the STWLC33 device with the final application.

Specifications

Manufacturer	STMicroelectronics
Category	Power Management
Sub-Category	Inductive Charging / Wireless Power
Eval Board Part Number	497-STEVAL-ISB042V1-ND
Eval Board Supplier	STMicroelectronics
Eval Board	Normally In Stock
Voltage Out	5 V 5.6 V 10 V
Current Out	900 mA 1 A 1.5 A
Protocol	Inductive, Qi-Compliant or Rezence
Voltage In	5 V
Current In	- Not Given
Standard(s)	Airfuel SR1 Qi v 1.2
Features	ADC's for Sensor Reading Foreign Object Detection (FOD) GUI / Design Software I²C Interface LDO Regulator(s), On-Chip MCU Controlled Memory Available On-Board Shutdown, Enable, Standby Thermal Protection
Frequency	110 ~ 205 kHz 6.78 MHz
No-load Input Power @ Conditions	- Not given
Efficiency @ Conditions	>80%, 10V @ 9 ~ 14 W >75%, 5V @ 3 ~ 5.5 W >60%, 5V @ 0.75 ~ 2.5 W (Tx)
Component Count + Extras	46 + 14
Design Author	STMicroelectronics
Main I.C. Base Part	STWLC33
Date Created By Author	2017-12
Date Added To Library	2018-06